Charateristics:
A.Automatic PLC control, touch screen operations, humanized control interface makes the operation and parameter setting simpler and faster, and has error prompt and self-diagnosis functions.
B. PLC automatic control, touch screen operations, humanized control interface makes the operation and parameter setting simpler and faster, and has error prompt and self-diagnosis functionsWhen the wrapping paper skin is used up, it will stop itself and alarm (the touch screen shows the reason for alarm).
C. The packing bags seal adopts the principle of heating and pressing. The heating temperature of horizontal seal and vertical seal can be adjusted independently and the temperature can be displayed in real time
D. The speed is set by the operator, and the number of qualified products on shifts and the total output on shifts are visually displayed on the touch screen;
E. On the control panel, there is an on-off button of compressed air, and the machine will stop automatically when the air pressure is lower than the minimum set pressure, and the fault cause will be displayed;
F. Safety system: The machine is equipped with a safety door. Open the safety door and the machine will stop automatically (set); At the same time, the machine is equipped with an emergency stop button to ensure the safety of the operator.
G. Simple maintenance: Simple structure design, low failure rate, less wearing parts, convenient maintenance.
H. of cleaning: The machine is designed with the convenience of cleaning fully considered. All parts in contact with the materials to be packed can be removed quickly, installed quickly, and swabbed especially convenient;
.
| Packing speed: | 30-120bag/min |
| Bag-making size : | (L)80-300mm (W)80-200mm |
| Metering range: | 100mL (maximum) |
| The maximum packaging film | width is 400mm |
| The film thickness : | 0.04-0.09mm |
| Gas consumption: | 0.8 Mps 0.6m3/min |
| Total power/voltage: | 3.0kW 220V 50HZ |
| Dimensions: | L1450mm*W1100mm*H1600mm |
| The weight: | 520kg |
| | |
Bag samples:
Workshop
Installation
The initial installation is NOT included with the professional ROTY team member. All installation with the ROTY team must be scheduled at least 4 weeks in advance before actual trip taken. All necessary connectivity must be ready prior the service being scheduled.
While ROTY team member arrives at the site for a complete and final installation, two days training course will be provide to the customer for operation and maintenance procedure. The initial installation is provided within 5 working days excluding travel days. The actual installation days may vary, based on different machine mode and packing lines. Each day of working hour consist at 8 working hours..
ROTY provide free parts and parts delivery, when manufacture defects has been detected during normal operation (vulnerable parts not included) under warranty period.
Warranty
All parts are under One Year Warranty with defects from manufacturer. Any other defect caused by human error, mishandling, wear-and-tear & any foreseeable conditions will not be covered by this warranty. All electronic parts and component can be guaranteed by original part’s manufacturer or ROTY.
